|
|
|
| You are here: Home> Products > Gate |
|
|
|
|
|
| Product Name：Z73X Knife type gate valve |
| Product Classification：Gate valves |
| Product Introduction： |
Used For mining coal power plants, slag, urban sewage treatment, food, paper, pharmaceutical, oil, chemical oil, water, steam piping, connect or disconnect the water pipe in the mud, gold powder , ore, slag, coal, pulp, wood pulp, tailings, fibers, dust, chemicals, sewage treatment, sedimentation tanks, asphalt, bunker exit, fruits, grains, slaughterhouse waste and other media
|
|
| Description |
Parameters |
Size Chart |
Application |
|
1.this series standard, the valve are suitable for the sewage treatment , the chemical industry, the manufacture paper pulp industry and the mining industry coal washing industry, to circulates the medium for pipeline in and so on liquid suspending liquid ,size plays cuts off and clears the role.
2.valves use the single side to force to seal, not only seals reliably, but also may remove the deposition to meet the seal requirements. The valve body may use materials of cast iron, carbon steel, stainless steel and Teflon, to satisfy resists corrosion, anti-rubs and other different request.
3.this structural length short, the weight is light. The installment and the service are convenient.
4.application temperature -10-120degrees |
|
1.Material:cast iron,cast steel,stainless steel,alloy steel.
2.Seal:Rubber, PTFE, Stainless steel, Hard Alloy
3.Operator:handwheel,wom gear,pneumatic,electric,cylinder,hydraulic and etc.
|
產(chǎn)品外形及結(jié)構(gòu)尺寸示意圖
 |
1, hand wheels, handles and drive mechanism for lifting are not allowed to use, and non-collision.
2, Gate Valve should be installed vertically (ie, stem in a vertical position, the hand wheel at the top).
3, the valve with a bypass valve opens the bypass valve in the open should be preceded by (in order to balance the import and export of pressure and reduce opening force).
4, with the valve drive mechanism, according to the provisions of the product installation instructions.
5, if the valve often used switches, lubrication at least once a month
|
|
